The Coppice 9050 offers a simple way to turn an old, inefficient open fire into a highly controllable and efficient heating source for your home. Being a sealed combustion unit, you'll also benefit from it burning extremely cleanly compared to an open fire without losing any of the character.
This attractive, steel stove is finished in matt black with stylish wooden door handle and easy to use air control lever located at the base of the appliance. With a nominal heat output of 5kW and high efficiency of 86.1%, the Burley Coppice 9050 as the optimum heat level for standard sized rooms and in most cases, additional ventilation is not required.
Simple and modern in design, the Coppice 9050 is constructed from steel. The plate steel sections are 5mm and 8mm thick and are welded by robots with the welds applied in exactly the right place and in exactly the right thickness resulting in the steel sections being melted and fused together to make a virtually indestructible construction. Weighing in at 95kg, you can be assured that this cutting-edge stove is built to last giving years of dependable service.
The Coppice 9050 is a DEFRA exempt inset stove and approved for burning wood in smokeless areas. A dedicated wood burning appliance capable of accepting logs up to 285mm (11¼") in length.
For homes built before 2010, an Air Vent is not normally required when fitting the Coppice. For homes built after 2010, an optional Outside Air Kit can also be purchased.
Included free with the Coppice 9050 is Burley's 'Thank You' pack which typically contains:
- Spanner to attach and adjust the tension of the air control lever
- Coaster to protect the top of your stove
- Moisture Meter to ensure your wood is dry
- Stove Paint in case you prefer black handles or ever need to touch up any paint work
- Heat Resistant Glove
- Scoop for removing ash
- Allen Key should you wish to adjust the door handle
- A Mug to enjoy a cup of tea whilst admiring the fantastic flame picture
The contents of the kits vary from model to model, so not all the items listed or shown above may be included with your stove.
(Manufacturers instructions are offered as a guide only and may not always be the latest version)
(Burley Wood Burning Stove brochure 2020)
Country of Manufacture
Wood Burning Stove
Nominal Heat Output
Maximum Heat Output
Maximum Log Length
CO concentration @ 13% Oxygen
Air Vent requirement
550mm sq. min in houses built after 2010, otherwise not required
Minimum flue draught mm H2O
Flue Gas temperature
Flue Size (top exit)
Minimum chimney diameter
Minimum distance to combustible materials. All other distance as per Building regulations Part J or HETAS recommendations
5cm behind (2") / 5cm at side (2") / 35cm to top (14")
*All dimensions are offered as a guide only and subject to change. These sizes are not to be used for any building preparation.
Estimated Delivery for this product is 3 Days*
We offer Free Delivery within Mainland UK on all our products.
All Burley products will be delivered using a specialist courier company. You will be contacted prior to despatch to arrange a suitable delivery day. A signature will be required on all deliveries.
*Subject to stock at suppliers